4CH 200M Wireless Remote Control Relay Switch Receiver + 2 Transceiver 4 Channel 12V DC for Smart Home

Get 4CH 200M Wireless Remote Control Relay Switch Receiver + 2 Transceiver 4 Channel 12V DC for Smart Home

Output Working Way:

1. Self-lock: connect the JP1 with the cutting out cap.

2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.

3. Inter-lock: Connect the Jp2 with the Cutting out cap,

Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).

Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).

Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).

Receiver:

Operating voltage: DC 12V

Operating current: 7mA

Frequency: 433mhz

Quiescent condition: 6mA

receiver sensitivity : more than -105dBm

Output voltage: AC and DC is optional

Output current: 3A

Size: 72mm (L) x 52mm (W) x 26mm (H)

Remote Control Transmitter:

Remote distance:50-100m

Operating voltage: DC 12V

Operating current: 13mA

Frequency: 433mhz

Code type: Fixed code / Learning code

Size: 55mm (L) x 30mm (W) x 10mm (H)

Features:

- Easy installation and use

- Stable and reliable, high receive sensitivity

Be designed to control a wide variety of electronic devices with a - wireless signal

Fitment:

It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.

Package Included:

1 x Receiver

2 x Transmitter

Note:

1.Please check as much as possible to make sure the item is the one that you need, for we provide clear pictures and measurements.

2.Please allow 0.5-1 inch difference due to manual measurement.

3.Instruction is NOT included. Professional installation is highly recommended.

4CH 200M Wireless Remote Control Relay Switch Receiver + 2 Transceiver 4 Channel 12V DC for Smart Home See detail

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features: 1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development Package includes: 1 x ESP32 OLED V2.0 1 x line 2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home

Get TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home Description: TEMT6000 is a silicon NPN epitaxial planar pho- totransistor in a miniature transparent mold for sur- face mounting onto a printed circuit board. The device is sensitive to the visible spectrum. Features: •Adapted to human eye responsivity •Wide-angle of half sensitivity = ± 60° •SMD style package on PCB technology •Suitable for IR reflow soldering •Lead-free component •The component in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC Applications: Ambient light sensor for display backlight dimming in: Mobile phones Notebook computers PDA’s Cameras Dashboards Package includes: 1 x Sensor Module TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home See detail

3pcs GX20 6 Pin 20mm Male & Female Wire Panel Circular Connector Aviation Socket Plug

Get 3pcs GX20 6 Pin 20mm Male & Female Wire Panel Circular Connector Aviation Socket Plug Features: Made of solid material, more durable. One set which includes one male and one female connector. With workmanship of cold pressing, it has high-temperature resistance. Used widely in aviation, data acquisition systems, inclinometer, computer automation measurement and control systems, audio/video, test and measurement, communications, etc. Specification: Material: Metal & Hard Plastic Type: 6Pin Color: Silver Dimensions: 5.2x2.1cm/2.04x0.83inch Rated voltage: 400V Rated current: 20A Ambient temperature: -50 ~ + 70 c Relative humidity: + 40 c when the temperature is up to 98% Atmospheric pressure: up 4,4kpa Vibration: vibration frequency of 10 ~ 100Hz, acceleration up to 100m / s2 Impact: frequency of 60 to 80 beats/min, acceleration up to 250m / s2 Centrifugal: acceleration of 250m / s2 Note: 1. Please allow 0-1cm error due to manual mea...

Yuna Maslova

Search This Blog