3pcs Four Digital Tube LED Display Module TM1650 with Button Scanning Module 4-wire Driver I2C Protocol

Get 3pcs Four Digital Tube LED Display Module TM1650 with Button Scanning Module 4-wire Driver I2C Protocol

Parameter:

1. Size: 42 x 36mm (length x width)

2. Digital tube size: four in one 0.36 inches

3. Driver chip: TM1650 four-in-one digital cathode tube

4. Voltage: DC 5V

5. Current: about 30ma

6. Service life: ≥50,000 hours

7. Cable length: 30cm

8. Drive mode: I2C protocol

9. Working temperature: -40 ° C ~ 85 ° C

Features:

1. Easy connection with just four wires

2. Only occupy two IO ports of the microcontroller, greatly reducing the IO port of the microcontroller

3. Eight levels of grayscale can be adjusted and can be adjusted by writing the value of the register

4. No need to dynamically scan the main program of the MCU, which greatly saves the CPU usage of the MCU

5. Convenient connection with various MCU control boards for display and parameter setting adjustment

6. The interface adopts white high quality plug, which is convenient for plugging and unplugging and convenient for wiring.

7. Widely used, can be used for the circuit board of the MCU control board that needs to expand the display, etc.

8. Four fixing holes 3mm for customers to install equipment panels

Use:

For counters, delays, frequency meters, stopwatches, voltage and current displays, etc.

Package includes:

3 x Four Digital Tube Display Module

3pcs Four Digital Tube LED Display Module TM1650 with Button Scanning Module 4-wire Driver I2C Protocol See detail

3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module

Get 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module Features: BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface High precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Specifications: Operating voltage: 3.3 V Pressure ranges: 300-1100 hPa (equivalent to + 9000 ...- 500 m above / below sea level) Relative accuracy: ± 12 hPa (equivalent to ± 1 m 950 ~ 1050hPa @ 25 ° C) Absolute precision type: ± 1 hPa (950 ... 1050 hPa, 0 ~+ 40 ° C) Offset temperature coefficient: 1.5 Pa / K, equiv. At 12.6 cm / K (25 ~ 40 ° C at 900 hPa) Temperature range: -40- + 85 ° C PCB Size: 15.5 x 11.5 mm Package Included: 3 x BMP280 Digital Sensor Module 3 x 6P Pin 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pre...

No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock

Get No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock Features: ● It is suitable only for a wooden door, especially for a drawer, locker, cabinet, sliding door. ● No need to drill holes, no damage to your cabinet. ● Auto return and auto lock function, easy operation. ● Stainless steel latch and ABS plastic case, durable and anti-corrosion. Specifications: - Material: stainless steel - Type: 1 key/2keys - Lock case material: ABS plastic - Accept the thickness of the cabinet door or wardorbe: within 50 mm. - Only suitable for wooden door - Power supply: 4x AA batteries. Package Included: 1 x No-hole Cabinet Lock 1 x Key(1 key/2keys optional) 1 Set Accessory Details Pictures: No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock See detail

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features: 1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development Package includes: 1 x ESP32 OLED V2.0 1 x line 2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

Yuna Maslova

Search This Blog