Skip to main content

CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver

CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver
CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver


Get CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver


Features:
 
1.The button supports up to 20PCS, and the receiver supports up to 100pcs.
2.If multiple buttons are paired with one or more receivers in the same system, each button can be set to a different ringtone.(This feature supports the sos button.) 
3. Power-off memory function: Turn the power on again after power off, no need to re-adjust and lock the ringtone.(This feature supports the sos button.) 
4. The doorbell transmitter and sos button has no screw chuck design, and it can be waterproof and dustproof without rubber ring.
5.The transmitter USE a 23A12V alkaline battery (not included battery).
6.The sos button USE a CR2032 battery.(not included battery).
7. Receiver voltage: 110-220-240V.
8.The receiver is available in a variety of plugs, US/EU/UK Plug and AU adapters, suitable for most countries.
9.Doorbell Receiving distance:300 meters in open area.
10.SOS button Receiving distance:80 meters in open area.
11.The wireless signal will be affected by obstacles. The more obstacles, the more serious the signal loss.
12.Receiver has 5 levels(can be mute) 0-110db,60 music to choose from.
13.Size:  SOS button:60x34x11.5mm, Receiver:95x65x24mm.

Package Includes:

1 x SOS button
2 x Receiver

Details Pictures :














CACAZI C10 Smart Home Wireless Pager Doorbell Old Man Emergency Alarm 80m Remote Call Bell 1 Button 2 Receiver See detail


Popular posts from this blog

TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home

Get TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home Description:   TEMT6000 is a silicon NPN epitaxial planar pho- totransistor in a miniature transparent mold for sur- face mounting onto a printed circuit board. The device is sensitive to the visible spectrum.   Features:   •Adapted to human eye responsivity •Wide-angle of half sensitivity = ± 60° •SMD style package on PCB technology •Suitable for IR reflow soldering •Lead-free component •The component in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC   Applications:   Ambient light sensor for display backlight dimming in:  Mobile phones Notebook computers  PDA’s Cameras  Dashboards Package includes: 1 x Sensor Module TEMT6000 Ambient Light Sensor Module Visible Ambient Light Intensity Detection For Smart Home See detail
Read more

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features:   1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development   Package includes:   1 x ESP32 OLED V2.0 1 x line ​2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail
Read more

20pcs NRF24L01+ Upgraded Version 2.4G Antenna Wireless Transceiver Module For Arduino

Get 20pcs NRF24L01+ Upgraded Version 2.4G Antenna Wireless Transceiver Module For Arduino Features:   P/N:  NRF24L01+ Receiver Channel Count: 6 Channels Low Operating Voltage: 1.9V-3.6V Maximum operating speeds up to 2Mbps, GFSK modulation efficiency Anti-interference ability, Particularly suitable for industrial control applications 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs Built-in 2.4Ghz antenna Built-in voltage regulator Wireless rate: 1 or 2 MBPS SPI interface rate: 0~8MBPS Transmit Power: (max) 4.5:+7 dB Receiver Sensitivity: ≦-90dB Transmission distance: (250kbps) 4.5:~250M Low working voltage: 1.9~3.6 V Available software to set the address, only received local Address when output data(Provide interrupt instruction) can be directly connected to a variety of microcontrollers, Software programming is very convenient Size: 15mm*29mm(W*L)   Application:   Mouse, Keyboar...
Read more