Skip to main content

M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32

M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32
M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32 M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32 M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32


Get M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32


Description:

RFID has an RFID chip MFRC522 inside.

The MFRC522 operates in the 13.56MHz frequency band and uses the modulation and demodulation principle to interact with the proximity RF card. This unit can realize the function of the card reading and writing device, to identify and re cord multiple card information, to encode and authority a RF card.

It is able tp establish applications such as access control system, punching system, warehouse goods storage and community vehicle access registration.

Connect this Unit to GROVE PORTA on M5Core, IIC adress is 0x28. 


Product Features:

  • Operating frequency: 13.56 MHz
  • I2C data rate: Fast mode: up to 400 Kbit/s; High-speed mode: up to 3400 Kbit/s
  • RC522 Transceiver Buffer: 64 bytes
  • Supported protocol: ISO14443A, MIFARE and NTAG
  • Operate temperature: -20℃-85℃
  • How long data be saved for: > 10 years
  • Reading and writing distance: < 8 cm
  • Program Platform: Arduino, UIFlow(Blockly, Python)
  • Two Le go installation holes
  • Product Size: 48.2mm x 24.2mm x 8.3mm
  • Product weight: 5.9g

Package Included:

  • 1x RFID unit
  • 1x GROVE Cable

Application:

  • Smart home access control system
  • Vehicle management
  • Smart transportation
  • Smart bookshelf

EasyLoader

<blockquote style="box-sizing: border-box; font-size: 16px; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); text-size-adjust: none; margin: 2em 0px; overflow: visible; padding: 1.5em; border-width: var(--blockquote-border-width, 0); border-style: var(--blockquote-border-style); border-color: var(--blockquote-border-color); border-radius: var(--blockquote-border-radius); background: var(--blockquote-background); color: rgb(33, 37, 41); font-family: -apple-system, BlinkMacSystemFont, &quot;Segoe UI&quot;, Roboto, &quot;Helvetica Neue&quot;, Arial, sans-serif, &quot;Apple Color Emoji&quot;, &quot;Segoe UI Emoji&quot;, &quot;Segoe UI Symbol&quot;; quotes: &quot;

1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.

2.After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click "Burn" to start burning. (For M5StickC burning, please Set the baud rate to 750000 or 115200)

3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5 system adopts ESP32 as the control core host. Before installing for M5Core, you need to install CP210X driver (you do not need to install with M5StickC as controller)Click here to view the driver installation tutorial

Example;

1. for Arduino IDE

The code below is incomplete. To get complete code, please click here.

After programming the RFID.ino, the IC card or the mobile phone NFC, close to the unit, moves back and forth around the unit, and the UID of the IC card or the RFID chip in the mobile phone will be printed on the screen of the M5Core.
 

2. UIFlow

To get complete code, please click here.

After opening and burning this example using UIFlow, place the proximity card on the Unit surface and the screen displays “True” and the UID number of the card.

Schematic:
 

PinMap:

M5Core ( GROVE A ) GPIO22 GPIO21 5V GND
RFID Unit SCL SDA 5V GND














M5Stack® Mini RFID Module RC522 Module Sensor for Arduino SPI Writer Reader IC Card with Grove Port I2C Interface for ESP32 See detail


Popular posts from this blog

3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module

Get 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module Features:   BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface High precision, ultra-low power consumption pressure sensors, can be applied to mobile devices.   Specifications:   Operating voltage: 3.3 V Pressure ranges: 300-1100 hPa (equivalent to + 9000 ...- 500 m above / below sea level) Relative accuracy: ± 12 hPa (equivalent to ± 1 m 950 ~ 1050hPa @ 25 ° C) Absolute precision type: ± 1 hPa (950 ... 1050 hPa, 0 ~+ 40 ° C) Offset temperature coefficient: 1.5 Pa / K, equiv. At 12.6 cm / K (25 ~ 40 ° C at 900 hPa) Temperature range: -40- + 85 ° C PCB Size: 15.5 x 11.5 mm   Package Included:   3 x BMP280 Digital Sensor Module 3 x 6P Pin 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pre...
Read more

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features:   1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development   Package includes:   1 x ESP32 OLED V2.0 1 x line ​2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail
Read more

No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock

Get No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock Features: ● It is suitable only for a wooden door, especially for a drawer, locker, cabinet, sliding door. ● No need to drill holes, no damage to your cabinet. ● Auto return and auto lock function, easy operation. ● Stainless steel latch and ABS plastic case, durable and anti-corrosion. Specifications: - Material: stainless steel - Type: 1 key/2keys - Lock case material: ABS plastic - Accept the thickness of the cabinet door or wardorbe: within 50 mm. - Only suitable for wooden door - Power supply: 4x AA batteries. Package Included: 1 x No-hole Cabinet Lock 1 x Key(1 key/2keys optional) 1 Set Accessory Details Pictures: No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock See detail
Read more