Computer Chassis 4pin Speed Temperature Control Cooling Fan PWM Fan Hub Speed Controller Support 8-way 10-way FAN

Get Computer Chassis 4pin Speed Temperature Control Cooling Fan PWM Fan Hub Speed Controller Support 8-way 10-way FAN

Features:

Suitable for 12V 4pin fans.

Power supply IDE interface input.

Support 10-way 4pin fans start at the same time, solve motherboard interface shortage.

Deal with the back EVA double-sided adhesive, you can fix the hub on the chassis.

Support PWM function, fan automatic speed control.

The PWM interface is connected to the motherboard CPU fan interface via the PWM connection cable,

The red interface is the CPU fan specific interface, and the black interface is the PWM regular fan interface.

EVA double-sided adhesive in the backside, you can fix the hub in the computer case.

Descriptions:

The fan is a 4-pin PWM fan, which is very important.

Some motherboard 4-pin interfaces are not a real PWM fan jack, they are adjusted by the voltage.

Such motherboards can not make PWM control fans.

Connect the motherboard 4-pin fan interface, BIOS starts the PWM function.

To solve the fan interface, and focus on dealing with fan cable.

Specification:

Color: Black

Material: Plastic + Electronic component

Size: 74 x 48mm

Package Included:

1 x 12V 10-way 4pin Fan Hub

1 x PWM Connection Cable

Computer Chassis 4pin Speed Temperature Control Cooling Fan PWM Fan Hub Speed Controller Support 8-way 10-way FAN See detail

3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module

Get 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module Features: BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface High precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Specifications: Operating voltage: 3.3 V Pressure ranges: 300-1100 hPa (equivalent to + 9000 ...- 500 m above / below sea level) Relative accuracy: ± 12 hPa (equivalent to ± 1 m 950 ~ 1050hPa @ 25 ° C) Absolute precision type: ± 1 hPa (950 ... 1050 hPa, 0 ~+ 40 ° C) Offset temperature coefficient: 1.5 Pa / K, equiv. At 12.6 cm / K (25 ~ 40 ° C at 900 hPa) Temperature range: -40- + 85 ° C PCB Size: 15.5 x 11.5 mm Package Included: 3 x BMP280 Digital Sensor Module 3 x 6P Pin 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pre...

No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock

Get No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock Features: ● It is suitable only for a wooden door, especially for a drawer, locker, cabinet, sliding door. ● No need to drill holes, no damage to your cabinet. ● Auto return and auto lock function, easy operation. ● Stainless steel latch and ABS plastic case, durable and anti-corrosion. Specifications: - Material: stainless steel - Type: 1 key/2keys - Lock case material: ABS plastic - Accept the thickness of the cabinet door or wardorbe: within 50 mm. - Only suitable for wooden door - Power supply: 4x AA batteries. Package Included: 1 x No-hole Cabinet Lock 1 x Key(1 key/2keys optional) 1 Set Accessory Details Pictures: No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock See detail

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features: 1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development Package includes: 1 x ESP32 OLED V2.0 1 x line 2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

Yuna Maslova

Search This Blog