20W DC-DC 3.3-5V to 5V-12V Boost Converter USB Module QC3.0 2.0 FCP Quick Charger For 18650 Li-ion Li-Po Lithium Battery

Get 20W DC-DC 3.3-5V to 5V-12V Boost Converter USB Module QC3.0 2.0 FCP Quick Charger For 18650 Li-ion Li-Po Lithium Battery

Description:

Input: DC 3.3-5V(25W)

Output : DC 5V/4A(default), 9V/2A, 12V/1.5A (QC2.0/QC3.0)

Quiescent current: about 1MA

Efficiency: <=95%

FP6601Q QC2.0/QC3.0/FCP Quick Fast Charging IC

Switching Frequency : 600KHz fixed

Overtemperature shutdown, input under-voltage protection and short circuit protection.

UVLO Low Threshold 2.6V, UVLO High Threshold 3.2V, suitable for 3.7V/3.8V/3.85V lithium battery power supply

Operating Ambient Temperature: -40 to 85 °C

Storage Temperature: -55 to 150°C

Size : 45*20*15mm

Weight: 10g

Attention:

This is a high-power boost QC2.0/QC3.0/FCP Fast Charging module. Please pay attention to the following when using:

1. The power supply must be sufficient. Can at least 30W output power.

2. The power and boost module leads must be thick enough (can pass 10A) and soldered well.

3. When charging quickly, the module generates a lot of heat. Please pay attention to ventilation and heat dissipation.It is recommended to add heat sink or fan to dissipate heat.

Applications:

QC2.0 QC3.0 FCP Fast Charging

Wall-Adapter, Smart Phones, Tablets, Notebooks

Mobile / Tablet Power Bank

Car Charger

LI-ION Li-Po Polymer lithium battery Charger

USB Power Output Ports

PTZ CCTV IP camera

Smart home/home automation

WIFI Router Switch Network equipment

Package includes:

1 x DDUPCRUA Boost QC3.0 2.0 FCP Fast Quick Charger Module

20W DC-DC 3.3-5V to 5V-12V Boost Converter USB Module QC3.0 2.0 FCP Quick Charger For 18650 Li-ion Li-Po Lithium Battery See detail

3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module

Get 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pressure Sensor Module Features: BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface High precision, ultra-low power consumption pressure sensors, can be applied to mobile devices. Specifications: Operating voltage: 3.3 V Pressure ranges: 300-1100 hPa (equivalent to + 9000 ...- 500 m above / below sea level) Relative accuracy: ± 12 hPa (equivalent to ± 1 m 950 ~ 1050hPa @ 25 ° C) Absolute precision type: ± 1 hPa (950 ... 1050 hPa, 0 ~+ 40 ° C) Offset temperature coefficient: 1.5 Pa / K, equiv. At 12.6 cm / K (25 ~ 40 ° C at 900 hPa) Temperature range: -40- + 85 ° C PCB Size: 15.5 x 11.5 mm Package Included: 3 x BMP280 Digital Sensor Module 3 x 6P Pin 3pcs BME280 Digital Sensor Temperature Humidity Atmospheric Pre...

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features: 1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development Package includes: 1 x ESP32 OLED V2.0 1 x line 2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock

Get No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock Features: ● It is suitable only for a wooden door, especially for a drawer, locker, cabinet, sliding door. ● No need to drill holes, no damage to your cabinet. ● Auto return and auto lock function, easy operation. ● Stainless steel latch and ABS plastic case, durable and anti-corrosion. Specifications: - Material: stainless steel - Type: 1 key/2keys - Lock case material: ABS plastic - Accept the thickness of the cabinet door or wardorbe: within 50 mm. - Only suitable for wooden door - Power supply: 4x AA batteries. Package Included: 1 x No-hole Cabinet Lock 1 x Key(1 key/2keys optional) 1 Set Accessory Details Pictures: No-hole Sensor Cabinet Lock Electronic Hidden Home Furniture Door Drawers Lock See detail

Yuna Maslova

Search This Blog