3-in-1 Vertical Charging Stand Station Dock Charger for Game Controller Cooler Cooling Fan for PlayStation 4 PS4 Slim PS4 Pro

Get 3-in-1 Vertical Charging Stand Station Dock Charger for Game Controller Cooler Cooling Fan for PlayStation 4 PS4 Slim PS4 Pro

Features:

The Multifunctional Stand holds for PS4 Slim/PS4 Pro/Regular PS4 snugly and securely and frees up a lot of horizontal space

The 2 fans are good and do provide some levels of cooling. It is really convenient to charge your 2 controllers at the same time.

All-In-One: vertical stand + cooling fan + controller charging station + LED Switch button + 12 games storage + 3 USB ports + EVA pad+USB cable

Universal Vertical Stand: perfect stand for PS4/PS4 Slim/PS4 Pro, allows your console to be used safely in a vertical position

Smart Cooling Fan: with 2 built-in high-efficiency cooling fans to keep the console from overheating, ensure long service life

Controller Charging Station: the stand has 2 slots for holding the controllers when you are not using them or when they are being charged, it supports charging 2 controllers simultaneously to save your charging time. (note: charger will stop working when the console is in off/sleep mode.)

Game Disc Storage: features 12 slots to organize your gaming space, it helps you store 12 discs at most, keeps your games in order, brings you the best gaming experience

3-USB Charging Port: equipped with a USB port, you can charge your other devices, such as mobile phone, tablet, camera, etc.

Note:

The game console, game disc, controllers are not included

Package Included:

1 x Multi-functional Stand

1 x USB Cable

1 x Holder for PS4 Slim

1 x Munual

**Specification**
Product power supply	USB 5V
Output current	the max charge current for a single controller can reach 800mA, the average charge current for both controllers is 400mA per one(No turn on the fan)
Max Fan speed	3500+10%PRM
Max wind volume	12.6 CFM
Charging time	2.5 - 3 hours (two controllers charging simultaneously)
Material	ABS
Size	252 x 247 x 62MM

3-in-1 Vertical Charging Stand Station Dock Charger for Game Controller Cooler Cooling Fan for PlayStation 4 PS4 Slim PS4 Pro See detail

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features: 1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development Package includes: 1 x ESP32 OLED V2.0 1 x line 2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console

Get Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console Features: Easy to install and use Rise & Heat dissipation Wall Holder Stable as one, no shaking, no tilting Fit for PS4 PRO Slim Controller Game Pad When the clip be installed well. Please do not rock it excessively Color: For PS4 PRO Black/For PS4 PRO White /For PS4 Slim Black/For PS4 Slim White Material: ABS Size: As Shown weight: 29g Material: ABS Size: As Shown weight: 29g White: suitabla f or PS4 Slim White1: suitabla f or PS4 PRO Black: suitabla f or PS4 Slim Black1: suitabla f or PS4 PRO Note: Due to the light and screen difference, the item's color maybe slightly different from the pictures. Please understand Please allow 0.5-1 inch difference due to manual Package Included: 4 x Wall Holder Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console See detail

5pcs L298N Double H Bridge Motor Driver Board Stepper Motor L298 DC Motor Driver Module Green Board for Arduino

Get 5pcs L298N Double H Bridge Motor Driver Board Stepper Motor L298 DC Motor Driver Module Green Board for Arduino Specifications: 1. Driver chip: L298N double H bridge DC motor driver chip 2. Drive part terminal power supply range Vs: +5V to +35V (If you need to take power inside the board, the power supply range is Vs: +7V ~ +35V) 3. Drive part of the peak current: 2A 4. Logic part terminal power supply range Vss: +5V ~ +7V (can take power +5V inside the board) 5. Logic part operating current range: 0 ~ 36mA 6. Control signal input voltage range: Low level: -0.3V≤Vin≤1.5V High level: 2.3V≤Vin≤Vss 7. Enable signal input voltage range: Low level: -0.3≤Vin≤1.5V (control signal is invalid) High level: 2.3V ≤ Vin ≤ Vss (control signal is valid) 8. Large power consumption: 20W (at temperature T=75°C) 9. Storage temperature: -25 ° C ~ +130 ° C 10. Driver board size: 48mmx43mmx33mm (with fixed copper post and heat sink height) 11. D

Yuna Maslova

Search This Blog