Skip to main content

3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560

3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560
3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560



Description:

Support Arduino UNO and Arduino Mega2560 and other development board DIP, Without any wiring, all open source, Arduino libraries offer
The backlight always on, can not control the backlight, backlight is connect to 3.3V
DC: 5V

More information: >>>>Click here<<<<


Note:

The control and driving circuit of TFT modules is low voltage and  FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity: 

1. Using soldering iron or  power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4. When the air is dry, can also generate static electricity, therefore, workshop humidity  shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,ormake  human body be well grounded;
6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
 
Package included:

3 x 3.5 Inch TFT Color Screen Module 320 X 480 Support Arduino UNO Mega2560






















3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 See detail


Popular posts from this blog

Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console

Get Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console Features:   Easy to install and use Rise & Heat dissipation Wall Holder Stable as one, no shaking, no tilting Fit for PS4 PRO Slim Controller Game Pad When the clip be installed well. Please do not rock it excessively Color: For PS4 PRO Black/For PS4 PRO White /For PS4 Slim Black/For PS4 Slim White Material: ABS Size: As Shown weight: 29g Material: ABS Size: As Shown weight: 29g White:  suitabla f or PS4 Slim White1:  suitabla f or PS4 PRO Black:  suitabla f or PS4 Slim Black1: suitabla f or PS4 PRO   Note:   Due to the light and screen difference, the item's color   maybe slightly different from the pictures. Please understand Please allow 0.5-1 inch difference due to manual   Package Included:   4 x Wall Holder   Heat Dissipation Damping Wall Bracket Stand Feet for Sony Playstation4 PS4 Pro Slim Game Console See detail

TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino

Get TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino Features:   1. Main control chip uses ESP32, Tensilica dual core processor, clocked at 240 MHz, computing capacity of up to 600 DMIPS, 520 SRAM, 802.11 KB chip b/g/n HT40 Wi-Fi transceiver, baseband, and LWIP protocol stack, Bluetooth (Bluetooth dual-mode integrated traditional and BLE low-power Bluetooth) 2. Onboard 4 M bytes (32 M bit) , flash, and Wi-Fi antennas 3. 0.96-inch White OLED display 4. Lithium battery charging circuit and interface 5. CP2102 USB to serial chip, perfect support for Arduino development   Package includes:   1 x ESP32 OLED V2.0 1 x line ​2 x pin TTGO 0.96 Inch ESP32 V2.0 OLED WiFi Module + Bluetooth Double ESP-32 et OLED 4 MB For Arduino See detail

Teli BT-559 2x180W bluetooth Amplifier with Remote Control Support FM USB Microphone EU

Get Teli BT-559 2x180W bluetooth Amplifier with Remote Control Support FM USB Microphone EU Features: Wireless bluetooth, easy to connect for iphone, for ipads, smart phones, tablet computers and other bluetooth devices, USB interface, that is, broadcast and use, and enjoy high quality music Treble, Bass and Volume controls adjustment and give you the real HIFI sound effect USB / SD slot to play MP3 from the memory stick or card Digital MP3 player Full function infrared control FM radio With two microphone jacks and effect Microphone reverb sound quality adjustment 2 Channels, with Equalizer adjustment Plug: Europe Plug Max. Peak Power: 1500W + 1500W Rate Power: 180W + 180W Load Impedance: 4 - 6 ohms Input Voltage: AC 220V-240V 50/60HZ; DC 12V/ 5A   Package Included:   1 X Teli BT-559 Multifunctional Amplifier 1 X Remote Control Teli BT-559 2x180W bluetooth Amplifier with Remote Control Support FM USB Microphone EU See detail